EN
GLISH
15
Connecting the power supply unit
Note:
Check that the mains voltage on the type plate (on the back of
the power supply unit) corresponds to your local mains supply. If
this is not the case, contact your specialist dealer.
1
Insert the plug of the power supply cable into the »
DC IN +5V
«
socket (on the rear of the device).
2
Plug the power supply unit into the mains.
Caution:
The device is connected to the mains by the power supply unit. If
you wish to disconnect the device from the mains completely, you
need to unplug the power supply unit.
Unplug the power supply unit to disconnect the device from the
mains. Make sure the power supply unit is easily accessible
during operation and not hindered by other objects.
CONNECTION AND PREPARATION
----
