EN
GLISH
21
General information
You can only use the full range of functions on the digital picture
frame when a data medium has been inserted or connected.
Switching on and off
1
Press »
8
« on the device to switch the digital picture frame on
from standby.
– Display: »Loading«; the automatic picture replay will then
start – if a data medium with corresponding data has been
inserted.
2
Press »
8
« on the device to switch the digital picture frame to
standby.
or
1
Press »
8
« on the remote control to switch the digital picture frame
on from standby.
2
Press »
8
« on the remote control to switch the digital picture frame
to standby.
Adjusting the volume
1
Press »
VOL +
« or »
VOL –
« on the remote control to adjust the
volume during playback;
or
adjust the volume on the device using »
a
« or »
s
«.
Selecting options in the main menu
(without data storage medium)
1
Press »
MENU
« to open the main menu.
– Two symbols appear:
– »Setup«: system and playback settings.
– »Calendar«: yearly calendar. The correct settings for the date
and time must be made before these can function.
2
Select the symbol using »
a
« or »
s
« and activate using »
OK
«.
Note:
Prerequisite for playback mode (pictures and music) is a data
medium which contains the data required. After inserting the data
medium a further selection symbol appears in the main memory
menu: »SD/MMC« (memory card) or »USB« (removable storage
medium).
GENERAL FUNCTIONS
----------------------------------------------------
Setup
1
