16
Inserting the data medium
Note:
Before inserting a memory card or a USB memory stick, switch off
the digital picture frame using »
8
«.
Only switch the digital picture frame on again after inserting.
Even if you remove the memory card or USB memory stick, the
digital picture frame must be switched off, otherwise files could be
damaged.
Inserting a memory card
The digital picture frame supports memory cards in SD, MS, MS
Pro and MMC formats.
1
Insert the card carefully into the »
SD/MMC/MS
« card slot (rear
panel, left) with the contacts facing the screen until it catches into
place.
Note:
Do not use excessive force when inserting the memory card. Only
apply slight pressure.
The memory cards are resistant to dirt and moisture, but may only
be inserted into the digital picture frame in a dry and clean
condition.
Never remove memory cards during operation. This can damage
the memory card. This type of damage will invalidate your
warranty.
Removing the memory card
1
Pull out the memory card.
CONNECTION AND PREPARATION
----
