38
DISHWASHER / USER INSTRUCTIONS
/51 EN
Operating the Product
3. Press Function b key (see Section 5,
Operating the Appliance) to save the
change, or press Function a (see Section
5, Operating the Appliance) to exit the
language menu without saving.
Factory Settings?
Proceed as indicated below to cancel all of
your personal settings and restore the factory
settings:
1. Press Function b key (see. Section 5,
Operating the Appliance) Following
message will be displayed upon
pressing the key.
2. Press Function b key (see Section 5,
Operating the Appliance) to save the
change, or press Function a (see Section
5, Operating the Appliance) to exit the
menu without saving.
Warning messages
Your machine will give you some important
feedbacks while it is running.
Check the filter
Take out and clean your filters as explained
in the "Maintenance and cleaning" section
when you get a 'check the filter' warning.
If there is water remained in the tank, ensure
that the water in the tank is discharged by
applying Programme cancelation process.
If water cannot be discharged, clean any
leftover deposits that have piled up in the
bottom of the tank and blocked the water
path.
Clean the interior of your machine and the
tank by running a prewash programme without
detergent or a long washing programme with
detergent based on the degree of dirtiness.
Salt indicator (
)
Please check the salt indicator on the display
to see whether there is adequate amount of
softening salt in the dishwasher or not. You need
to refill the salt reservoir with salt whenever
salt indicator appears on the display of your
machine.
Rinse Aid indicator ( )
Please check the no rinse aid indicator on
the display to see whether there is adequate
amount of rinse aid in the dishwasher or not.
You need to refill the rinse aid dispenser with
rinse aid whenever the ‘no rinse aid’ warning
symbol lights.
Adjusting the Rinse Aid
Amount
To enter the Settings menu:
1. Press On / Off button to switch on the
machine.
2. Press and hold the Settings Menu for 3
seconds to enter the “Settings Menu”.
3. “Settings 3”, “Settings 2”, “Settings
1” will be displayed on the Display
Information row and you will enter the
Settings Menu in 3 seconds.
4. In the “Settings Menu”, press the Child
Lock key to go to the next main menu
and press the Settings Menu key to go
to the previous main menu.
5. To make changes in the menus, press
Function a key (see Chapter 5,
Operating the Product). Changes will be
saved automatically.
1. Level - Rinse aid is not used
2. Level - 1 dose of rinse aid is dispensed
3. Level - 2 doses of rinse aid is dispensed
4. Level - 3 doses of rinse aid is dispensed
5. Level - 4 doses of rinse aid is dispensed.
