DISHWASHER / USER INSTRUCTIONS
35 / 51 EN
Operating the Product
Messages related to Washing, Rinsing and
Drying steps will be displayed respectively
on the Display Information line while the
selected programme is running. Programme
step is shown as left aligned and the
remaining time is shown as right aligned. This
screen and bar screen alternate in every 10
seconds.
C
After the rinsing step the machine
will wait silent in pause mode for
some time in order to have the
water remaining in the machine
and on the dishes drained
completely and to have the
water softener cleaned, and then
it will resume running in drying
mode.
Child Lock
You can prevent other people from affecting
and changing the programme flow and time
delay while the machine is running.
To activate the child lock:
1. Press and hold the Child lock key for
three seconds.
2. An audible signal will be heard when
the child lock key is pressed for the first
time. If you hold the key pressed, "Child
lock: 3", "Child lock: 2", "Child lock:
1", Child lock: On" will appear on the
Display Information line. If any key other
than the On/off key is pressed while the
child lock is active, "Child lock: On" will
appear on the Display Information line
along with a warning sound.
C
Child lock prevents the selected
programme or functions from
being changed and disables the
Start / Pause / Cancel key.
C
Child lock does not lock the door
of the machine.
C
If you switch your machine off by
using On/Off key at the end of
the programme, the child lock will
be deactivated automatically.
To cancel the child lock:
1. Press and hold the Child lock key for 3
seconds.
2. When the Child lock key is pressed and
hold for a long time, "Child lock: 3",
"Child lock: 2", Child lock: 1" and "Child
lock: Off" will appear on the Display
Information line.
Cancelling the programme
1. Press and hold the Start / Pause /
Cancel key for 3 seconds to cancel the
programme.
2. When the Start / Pause / Cancel key is
pressed and hold, "Cancel 3", "Cancel
2", "Cancel 1" will appear on the
Display Information line.
3. When the cancelling process starts,
"Cancelling..." will appear on the
Display Information line and once the
process is completed, "Cancelled"
message will be shown on the Display
Information line. The machine will
perform the operations necessary for
the programme cancellation for a few
minutes.
C
You can select and operate
a new programme after the
cancellation of the programme.
