36
DISHWASHER / USER INSTRUCTIONS
/51 EN
Operating the Product
C
There might be residues of
detergent or rinse aid left in the
machine and/or on the pieces
being washed depending on the
step in which the programme has
been cancelled.
Changing the auxiliary
function
You must cancel the programme first in
order to change the auxiliary functions after
the programme has started. Then you can
select and start a new programme and new
functions.
Machine settings
You can use the "Settings Menu" to restore
factory settings or change the settings for
"Water Hardness", "Volume", "Brightness",
"Language", and Additional functions you
will use on your machine.
To enter the settings menu:
1. Switch on the machine by pressing the
On / Off key.
2. Enter the "Settings Menu" by pressing
and holding the Settings Menu key for 3
seconds.
3. "Settings 3", "Settings 2", "Settings 1"
will appear on the Display Information
line and you will enter the Setting Menu
after 3 seconds.
4. After entering the "Settings menu", press
the Child lock key to go to the next
menu, or press the Settings menu key to
return to the previous menu.
5. Use the Function a key (see. Section
5, Operating the Appliance) to make
changes in the menus. Changes
that have been made are saved
automatically.
C
You will be asked for your
approval when changes are
made in "Language" or " Factory
Settings?" menus.
6. After making changes in the "Language"
setting or in the "Factory Settings?"
menu, press either the Child lock key or
the Settings menu key in order the save
these changes. Following message will
be displayed upon pressing the key.
7. Press Function b key (see. Section 5,
Operating the Appliance) to save the
changes. You will enter the next settings
menu and the changes will not be saved
if you press Function a (see. Section
5, Operating the Appliance) without
making changes in the menu.
8. Press and hold the Settings menu key for
3 seconds to exit the "Settings Menu".
9. "Exit settings 3", "Exit settings 2", "Exit
settings 1" will appear on the Display
Information line and you will exit the
Settings Menu after 3 seconds.
C
Time Delay and Start / Pause
/ Cancel keys do not have any
function in the "Settings Menu".
Pressing these keys has no effect.
Adjusting the Water Hardness
You must adjust the "Water Hardness" level
to one of the following values that suits the
properties of your water mains.
