DISHWASHER / USER'S MANUAL
29 / 44 EN
Operating the product
C
Your machine performs water
softening depending on the
hardness level of the supply
water. Remaining time displayed
towards the end in some
programmes can be different
from the time indicated at the
beginning due to this process.
The total time can also change
while the programme is running
depending on the ambient
temperature where your machine
is installed, temperature of the
supply water and amount of the
dishes.
C
Pay attention not to open the
door of the machine when it is
running. Stop the machine by
pressing Start / Pause / Cancel
key if you have to open the
door. Then, open the door of
the machine. There may be a
rush of steam when you open
the door of your machine; be
careful. Close the door of your
machine and press Start / Pause
/ Cancel key again. Programme
will resume running.
Programme follow-up
You can follow-up the washing step in
which the current programme is in from the
Programme Steps Follow-up indicator on the
display.
a) Washing Step indicator
b) Rinsing Step indicator
c) Drying Step indicator
d) End of Programme indicator
Indicators for Washing / Rinsing / Drying
will light respectively on the display
throughout the washing programme.
Indicator of a finished step will not go off,
but they will light additionally to each other.
When the programme is over, indicators of
washing steps go off and only the End of
Programme indicator lights.
C
None of the Programme Steps
Follow-up indicators will light
while the Time Delay is enabled.
C
The machine will remain silent
in pause mode for some time
in order to remove the water in
the machine and on the dishes
completely and to have the
water softener cleaned, and then
it will resume running in drying
mode.
Child (Key) Lock
You may prevent other people from
interrupting and changing the programme
cycle and time delay while the machine is
running.
To activate the child lock:
1. Press and hold the Child (Key) Lock key
for three seconds (it is on the same key
with the Tablet function).
2. Display Information Line will show
“CL 3”, “CL 2”, “CL 1” and “ CL On”.
C
Child Lock prevents the selected
programme or functions from
being changed and disables the
Start / Pause / Cancel key.
C
Child Lock does not lock the
door of the machine.
Summary of Contents for GNF 41810 W
Page 44: ...FOR A GOOD REASON ...
