30
DISHWASHER / USER'S MANUAL
/44 EN
Operating the product
C
If you turn your machine off
by using On/Off key at the
end of the programme, the
Child Lock will be deactivated
automatically.
C
If no key is pressed after the
programme is over, machine will
be automatically turned off after
5 minutes. Child Lock is disabled
once the machine is turned off.
To deactivate the Child Lock:
1. Press and hold the Child (Key) Lock key
for 3 seconds (it is on the same key with
the Tablet function).
2. Display Information Line will show
“CL 3”, “CL 2”, “CL 1” and “ CL Off”.
Cancelling a programme
1. Press Start / Pause / Cancel key for 3
seconds to cancel the programme.
2. Release the key when the Start / Pause
indicator starts flashing. For a couple
of minutes the machine will fulfill the
necessary operations required to cancel
the programme.
C
You can select and operate a
new programme following the
cancellation of the programme.
C
There might be residues of
detergent or rinse aid left in the
machine and / or on the pieces
being washed depending on the
step the programme you have
cancelled was in.
Changing a programme
To change a running programme, you
should cancel the programme in the first
place. Then, you can select and start a new
programme.
Volume setting
Your machine is equipped with a Buzzer to
inform warnings audibly.
When the Volume Level key (same as the
Half Load key) is pressed and hold for 3
seconds to adjust the volume level, Volume
Level indicator will light and the Buzzer will
play the opening melody in the same volume
set. At the moment of first press, current
key tune will be played. First line and the
speaker icon will light for low volume. 3 lines
altogether and the speaker icon will light for
high volume. Volume Level indicator will go
off after 3 seconds.
Salt indicator ( )
Please check the salt indicator on the display
to see whether there is adequate amount
of softening salt in the dishwasher or not.
You need to refill the salt reservoir with salt
whenever salt warning indicator appears on
the display of your machine.
C
Adjusting the water hardness
level is explained in Water
Softening System section.
Rinse Aid indicator ( )
Please check the rinse aid indicator on the
display to see whether there is adequate
amount of rinse aid in the dishwasher or
not. You need to refill the rinse aid reservoir
with rinse aid whenever rinse aid warning
indicator appears on the display of your
machine.
Water Cut-off indicator (
)
1 Water Cut-off warning indicator will light
when the machine cannot take in water.
When the water is supplied again, warning
light will be turned off automatically.
Summary of Contents for GNF 41810 W
Page 44: ...FOR A GOOD REASON ...
