- 36 -
Troubleshooting
If you have any issues or queries about the functions of this TV, please check the
below table as we have provided you with FAQs to assist with any issues. If this
table is not of assistance, please contact the Grundig warranty line 1800 509 394.
Issue
Solution
No power
Turn off the unit on the remote and at the wall socket.
Pull out the power plug. Wait 60 seconds and then plug
the power cord back in turn the power and unit back on.
No picture
Check that your cables and antenna have been
connected firmly.
Check that your Picture Settings are correct.
Conduct a restore setting to return settings back to the
factory default and clear any incorrect settings.
No sound
Check that your audio cables have been connected
firmly.
Check that the Mute setting is not on and that your
Audio Settings are correct.
Conduct a restore setting to return settings back to the
factory default and clear any incorrect setting.
Color distortion
Ensure that the equipment is connected properly.
Ensure that the AV video signal Input is connected
properly.
Remote control is
not responding
Make sure there are no obstacles in the way of the
remote control and the sensor.
Check the batteries, as they may need to be changed.
Move closer to the remote sensor.
Screen glittering
under PC mode
Reset the computer and enter the safety mode, then
select the appropriate screen type by consulting the PC
operation manual.
Screen traversed
under PC mode
The phase is not appropriate. Enter the PC setting and
change to correct level.
