Grundig GKB-A0110M, Owner'S Manual

Page: 9 / 18

5.4. Connection to a GRUNDIG DVR
Connect a GRUNDIG Recorder directly to the Keyboard by connecting the + and – of the RS-485 port with the
corresp and – ports of COM Port of the GRUNDIG DVR. Set the serial settings of the corresponding COM
port of the DVR to GKB-A0110M or WKC-100 (depending on the firmware).
The Keyboard is already configured under DVR mode. Motordome cameras that are connected to the DVR and
configured in the DVR can be controlled by the keyboard, too.
NOTE: You can also use a RS232 cable to control the DVR. Connect an appropriate cable to the connectors of the
keyboard and the DVR and configure the COM1 port of the DVR as described above.
7 English