Grundig GDK 5782 B, User Manual

Page: 16 / 20

16
MAINTENANCE AND CLEANING
_________________
7
Within 3 seconds press the “D” key to
activate/deactivate carbon filter saturation
alarm.
7
“C” symbol lit - carbon filter saturation
alarm ACTIVATED.
7
“C” symbol unlit - carbon filter saturation
alarm DEACTIVATED.
Replacing the carbon filter
Resetting the alarm signal:
7
Switch off the motor and the lighting system.
7
Press the “G” key for at least 2 seconds.
Replacing the filter:
7
Open the comfort panel.
7
Remove the metal grease filters.
7
Remove the carbon filter as indicated in the
picture.
7
Place the filter again into its seat.
7
Place again the metal grease filters into their
places.
Cleaning the hood
7
Hood must only be cleaned when it is
unplugged from mains outlet or when the
fuse is switched off!
7
Hood must not be cleaned with a vapor
cleaner as it not ensured that it would operate
safely afterwards due to water vapor.
Outer surfaces of the hood must be cleaned
with a mild cleaning agent (e.g. dish soap).
Do not use strong cleaning agents, abrasive
agents or sharp objects.
Stainless steel surfaces shall be cleaned with
a commercially available stainless steel clean-
ing agent and a soft, non-abrasive sponge or
cloth. In order to prevent scratches, wiping
action shall be performed on the direction of
surface structure while you are cleaning the
stainless steel surfaces.
Replacing the lamp
7
Remove the 2 screws fixing the lighting
support, and pull it out of from the hood.
7
Remove the lamp from the support.
7
Replace with another of the same type,
making sure that the two pins are properly
inserted in the lamp holder socket holes.
7
Install the support, fixing it in place with the
two screws removed in previous steps.