Grundig GDK 5782 B, User Manual

Page: 12 / 20

12
Air outlet in ducted version
When installing the ducted version, connect
the hood to the chimney using either a flexible
or rigid pipe with a diameter 150 or 120mm
(the choice of which is left to the installer).
To install a pipe with a diameter of
150 mm:
7
To install the damper (10)
7
Fix the pipe in position using suitable pipe
clamps (not supplied).
To install a pipe with a diameter of
120 mm:
7
To install an air exhaust connection with
a diameter of 120 mm, insert the reducer
flange (9) onto the damper (10).
7
Fix the pipe in position using suitable pipe
clamps (not supplied).
7
Remove carbon filters if any.
Usage with carbon filter
7
Cut a hole with a diameter of 125 mm in
any shelf that may be positioned over the
hood.
7
Insert the reducer flange
(9)
on the hood
body outlet.
7
Connect the flange to the outlet on the shelf
over the hood using a flexible or rigid pipe
with a diameter of 120 mm.
7
Fix the pipe in position using suitable pipe
clamps (not supplied).
7
Fix the grille (8) which can be installed only
in one direction on the recirculation air out-
let using the 2
12e (2,9 x 9,5) screws.
7
Ensure that the carbon filters have been in-
serted.
Usage with carbon filter
7
Insert the Connector (15) into the Support
bracket (7.3) and fix it with a screw.
7
Insert the connection extension pieces later-
ally
(14.1)
in connection
(15)
.
7
Make sure that the outlet of the extension
pieces
(14.1) is horizontally and vertically
aligned with the chimney outlets.
7
Connect the air outlet connection
(15)
to
the hood body outlet using either a flexible
or rigid pipe with a diameter of 150 mm
(the choice of which is left to the installer).
7
Ensure that the carbon filters have been in-
serted.
INSTALLATION
_____________________________________