Do not apply any pressure to the monitor screen as the screen may
break.
Do not install the monitor in a location that is exposed to direct
sunlight, dust, mechanical vibration or shock.
Always place the monitor on a flat surface.
Connect the power supply to the socket and plug the video cable or
HDMI/VGA cable to the desired signal source.
Disconnect the power plug from the power outlet under following
conditions:
- If you will not use it for an indefinite period of time.
- When the power cord or plug is damaged or frayed.
- If the product has been dropped or the cabinet has been damaged.
- If the product exhibits a distinct change in performance, this
indicates a need for service.
To clean the monitor's plastic case and display, a soft, lint-free cloth
can be used. Do not use any cleaning materials with abrasive
surfaces like scrub pads to clean your monitor.
To clean the display, a slightly damp cloth may be used to clean off
fingerprints or smudges. Please unplug the monitor first before
attempting cleaning with a damp cloth.
To clean the plastic case, a mild detergent may be used to clean the
surface. But please do not use too much detergent or water as this
could leak into the interior of the monitor. Please unplug the
monitor first before attempting cleaning with a detergent or water.
Do NOT use any liquid cleaners based on alcohol, methylated spirit
or ammonia or aerosol cleaners, as this may damage any coating
present on the glass surface of the monitor. Use only mild soap or
detergent with water or special cleaners for cleaning glass panels.
3. Package Content
The package contains the following content:
1x Monitor, 1x User manual, 1x HDMI Cable, 1x Power Cord, 1x
Remote Control
4. Connections
View of the Rear Interface:
AC IN:
Connect the power cord that is included in the package.
HDMI (High-Definition Multimedia Interface):
Here you can
connect a monitor with an HDMI cable (the cable is not included
in the package).
NOTE:
HDMI includes not only the image transfer but also the
ability to transmit audio.
VGA IN:
Connect the monitor with a VGA cable. Fasten the screws.
AUDIO IN:
Please use the 3.5 mm jack to transmit audio signals for
VGA mode.
4
5
