Grundig GCA-C0245P, Owner'S Manual

Page: 28 / 46

5.3.13. SEQUENCE
The function executes the pre-positioning of the pan, tilt, zoom and focus features in a certain sequence for a
camera. Before setting this function, users must preset at least two preset points.
SEQUENCE LINE:
There are eight sets of sequence lines built in the Dome Camera. Please use the LEFT/RIGHT direction keys to
first select a line and then set its sequence points.
SEQUENCE POINT:
Up to 64 points can be specified for each sequence line. A Sequence Point represents the location of a preset in
an order of preset points that the Dome Camera will automatically run. The following setup items, including
PRESET POSITION, SPEED and DWELL TIME, will influence how the camera runs through each sequence point.
PRESET POSITION:
Users can assign a specific preset position to the selected Sequence Point with this item. Options include “1~255”
and “END”. END is used for the Sequence Point following the last Sequence Point when the amount of sequence
points (see the previous section) is less than 64 points.
NOTE: If not all 64 points are used, please set the point following the last Sequence Point as the “END” (PRESET
POSITION) so that the sequence line can work properly. For example, if a user intends to set a Sequence Line
with 5 sequence points, it is required to set the PRESET POSITION of a Sequence Point 06 as “END”.
SPEED:
Users can set the pan/tilt speed the transition from one Sequence Point to the next one. The range of setup speed
is from 1 to 15. Within this range, the PAN speed varies from 10 to 400 (degrees/sec.), and the TILT speed varies
from 8 to 400 (degrees/sec.).
DWELL TIME:
The DWELL TIME is the duration the Dome Camera stays at a sequence point. The range of duration time is from
<0> to <127> seconds. The Dome Camera will go to the next sequence point when the DWELL TIME expires. If the
setting is <0>, the Dome Camera will stay at this sequence point for less than 1 second and then shift to the next
point.
RUN SEQUENCE:
Users can command the Dome Camera to run the selected Sequence line manually. Press the <CAMERA MENU>
key (ENTER) to execute a sequence line.
26 English