Grundig GCA-C0245P, Owner'S Manual

Page: 27 / 46

After completing the title setting, go back to MAIN PAGE 2 to set up preset points.
5.3.12. PRESET
STEP 1:
Press the RIGHT/LEFT direction key on the keyboard to select a number (1 represents Preset Point 1, 2
represents Preset Point 2, etc.)
PRESET SET:
In total, 256 preset points can be set. Follow the steps below in the preset setting menu.
STEP 2:
Press the <CAMERA MENU> key (ENTER) on the keyboard, and then rotate the dome camera to a target shooting
area/point.
STEP 3:
Press the <CAMERA MENU> key again to save the defined preset point.
Once the setup of a preset point is completed, users can move the cursor to the next item to run the preset point.
PRESET RUN:
Select the preset point that you want to execute. After pressing “ENTER”, the camera will move to the appointed
point.
EXIT:
Exit the PRESET menu and go back to MAIN PAGE 2 to set up a sequence.
NOTE: Users can set preset points through a keyboard. Please refer to the control keyboard’s quick guide for
further information.
25 English