32
Resetting the digital receiver to its original state
This function enables you to delete the channel lists and all custom
settings.
1
Press »
i
« to open the main menu.
2
Select »Box Settings« with »
P-
« or »
P+
« and press »
OK
« to
confirm.
3
Select »Restore Factory Settings« with »
P-
« or »
P+
« and press
»
OK
« to confirm.
4
Press »
Ǹ
« or »
Ƿ
« to select »Yes« and press »
OK
« to confirm.
– The receiver switches itself off and then on again.
– The »Initial installation« menu appears.
5
Reprogramme the device as described from page 13 onwards.
Updating the digital receiver software
The digital receiver’s technology enables you to update the soft-
ware.
You can also search for updates manually.
1
Press »
i
« to open the main menu.
2
Select »Technical Information« with »
P-
« or »
P+
« and press
»
OK
« to confirm.
3
Select »System Information« with »
P-
« or »
P+
« and press
»
OK
« to confirm.
4
Confirm »Update Software« with »
OK
«.
– The digital receiver automatically starts the search for its
download channel and then checks whether new data is
available. This can take several minutes. Please wait until the
search is finished.
5
Press »
Ǹ
« or »
Ƿ
« to select whether you want to update the
data (»Yes« or »No«) and press »
OK
« to confirm.
– If you select »Yes«, the software download begins.
– Once the download is complete, the receiver starts again and
automatically switches to preset 1.
Note:
An interruption when saving the download (for example by dis-
connecting the power cord) can damage the operating software
of the digital receiver.
Read the instructions in the menus carefully.
SPECIAL SETTINGS
______________________________
