17
ENGLISH
SETTINGS
---------------------------------------------------------------------------------------------------------------------------------------
Select one of the options by pressing » « or
» « or by turning the Jog-Shuttle and con-
firm by pressing on the Jog-Shuttle or »
OK
«
on the remote control.
– The menu »Set timezone« appears (only if
»Update from Network« was selected).
Note:
7
If »Update from FM« was selected, con-
tinue from point 7.
5
Select the time zone (ex. »UTC +00:00 Dub-
lin, London«) by pressing » « or » « or by
turning the Jog-Shuttle and confirm by pressing
»
OK
«.
– Display: »Daylight savings« menu opens.
Time/Date
Daylight savings
ON
OFF#
Daylight saving
6
Select Daylight savings (for Central Europe)
by pressing » « or » « or by turning the Jog-
Shuttle to select »
ON
«, and confirm by press-
ing »
OK
«.
Winter time is set using »
OFF
«.
– The menu »Wlan region« appears.
Time/Date
Wlan region
Most of Europe
Canada
USA
Spain
France
7
Select one of the WLAN regions by pressing
» « or » « or by turning the Jog-Shuttle and
confirm by pressing »
OK
«.
(This setting depends on the location where
you are operating your Cosmopolit 3.)
– The »SSID« menu appears, and the avail-
able networks (access points) are displayed.
Time/Date
SSID
ED-wifi
rd-linksys
arts-pmd
(Rescan)
Note:
7
If the network name (SSID) is suppressed on
the WLAN router for security reasons, the
network cannot be found. It must then be
entered manually. Cancel the setting using
»
8
« and continue with the chapter “Special
Settings” – “Manual Configuration”.
Note:
7
If you wish to connect via a LAN cable, select
the option »Wired« using » « or » « or by
turning the Jog-Shuttle, and confirm by press-
ing »
OK
«. The initial set-up is then finished.
8
Select your wireless network (SSID) by press-
ing » « or » « or by turning the Jog-Shuttle
and confirm by pressing »
OK
«.
– WEP or WPA Key menu opens, the cursor is
positioned in the first input position.
Time/Date
Key:
0123456789
abcdefghi̇jklmn
opqrstuvyzABCD
DEFGHIJKLMN
BKSP
OK
CANCEL
Note:
7
If the network is encrypted, the network
key (security code WEP or WPA) must be
entered.
9
Enter your wireless security code:
Select the first character (capital and small let-
ters, numbers, symbols) by pressing » «, » «,
» « or » « or by turning the Jog-Shuttle and
confirm by pressing »
OK
«.
Repeat the procedure for all characters.
After you finish entering all characters, select
the push button »OK« by pressing » «, » «,
» « or » « or by turning the Jog-Shuttle and
confirm by pressing »
OK
«.
– The menu »Internet Setup« appears, the net-
work registration is processed.
