A
MANUAL ITEM: 871125223147
CARBON MONOXIDE DETECTOR
MODEL: KD-218A
BRIEF INTRODUCTION
Thank you for purchasing this carbon monoxide alarm produced by
our company. Make sure that you read this user manual thoroughly
before using the product.
This product can emit visual and audible alarms.
This product has the following features:
This alarm has been designed and tested to detect CO in a residential
environment. It implements standard BS EN 50291-1:2018. It uses
electrochemical sensor and has high sensitivity, stable performance,
strong anti-interference, small size and long service life. It can provide
sensor fault warning, low battery warning, end-of-life warning and low
CO concentration warning.
IMPORTANT
Make sure that you read this user manual thoroughly before using the
product. This carbon monoxide alarm is designed to detect carbon
monoxide and can NOT be used to detect smoke or any other gas.
As the covering area of CO detection is limited, we recommend you
to install CO alarms in each room of your home to protect the whole
family effectively.
1. PRODUCT FEATURES AND SPECIFICATIONS
1.1 Electric Parameters
Gas detected: Carbon monoxide
Dimension: 107 x 77 x 36mm
Weight: 116g
Power: 3-AA LR6 Batteries
Low battery warning: When the voltage is less than 3.6V, low battery
warning is given. The unit can still work properly for 7 days after the
warning.
Working condition: temperature -10°C to +45°C, 0-93% relative
humidity
Quiescent current: <30uA
Alarm current: <65mA
