
1.2.2 Parts function
1. CO Alarm: The whole product.
2. LCD display: Show detector’s parameters.
3. Buzzer: Sounder of the detector.
4. Power indicator: Green light that is used for power indication.
5. Fault indicator: Yellow light that is used for fault indication.
6. Alarm indicator: Red light that is used for alarm indication.
7. Test button: For testing and alarm silence.
8. Sensor inlet: Gas inlet.
9. Battery compartment: Where to install the battery.
10. Mounting hole: Hole for the buckle.
11. Mounting plate: The plate that the detector is attached to for
support.
12. Screw hole: Hole for screw installation.
13. Buckle: For attaching the detector to the mounting plate.