Grundig 43 VLE 5523 BN, User Instructions

Page: 63 / 82

63­
ENGLISH
SETTING­FURTHER­CHANNELS
­-----------------------------------------------------
Antenna­settings­and­searching­
for­digital­channels­from­a­satel-
lite­automatically
Notes:
7
The following description about the LNB set-
tings premise a substantial expertise about
the satellite systems. Ask your specialist
dealer.
1­ Open the menu with » MENU «.
2­
Select the menu item »SOURCE SETUP«
with »
V
« or »
Λ
« and press »
OK
« to
confirm.
– The »SOURCE SETUP« menu appears.
3­ Select the line »Source« with »
V
« or »
Λ
«
and press » OK « to confirm.
Select the input source »Satellite« with »
<
«,
»
>
«, »
V
« or »
Λ
« and press » OK « to
confirm.
4­ Select the line »Antenna Settings« with »
V
«
or »
Λ
« and press » OK « to confirm.
– The menu appears.
5­
Select and set the required option for the
antenna settings with »
V
« or »
Λ
«:
­ Satellite­
Press »
OK
« then select the required satel-lite
with »
<
«, »
>
«, »
V
« or »
Λ
« and press
»
OK
« to confirm.
­ LNB­Type­
Press » OK « then select the required LNB
Type with »
<
« or »
>
«, enter the required
data and confirm with »

« (green).
­ LNB­Power­
Set the LNB power supply (depending on
the type of LNB) to »Off« »13/18 V« or
»14/19 V« with »
<
« or »
>
«.
­ LNB­Selection­
Only necessary for »DiSEqC 1.0« or
»DiSEqC 1.1«, see chapter “Searching for
antenna settings for DiSEqC 1.0/1.1 and
digital channels from a satellite automati-
cally”.
6­ Select »Auto Tuning« by presing »

« (red).
7­
Select the line »Scan Mode« with »
V
« or
»
Λ
«.
Select the scan mode with »
<
« or »
>
«
(for unencrypted channels, for encrypted
channels only, or both).
8­ Select the line »Service Type« with »
V
« or
»
Λ
«.
Use »
<
« or »
>
« to select whether you want
to search for television channels (TV) only,
radio stations only (Radio) or both
(Radio + TV).
9­ Start the scan with »

« (red).
– The »Results« menu appears, and the scan
for TV channels begins.
Notes:
7
When updating via the same satellites a
security query is displayed at the start of a
search.
7
If the previously stored channels should
be retained in the channel list and the new
channels found be added to it, then press
»

« (green).
7
If »

« (red) is pressed, the saved channels
will be deleted from the current channel list.
– The »Results« menu appears, and the scan
for channels begins.
– Depending on the number of channels re-
ceived, this can easily take a few minutes.
– The search is complete as soon as the
»PROGRAM TABLE« appears.
Note:
7
You can abort the search by pressing
» MENU «.
10­
Press »
MENU
« to end the setting.