Grundig 43 VLE 5523 BN, User Instructions

Page: 55 / 82

55­
ENGLISH
DIGI­LINK
Your television is equipped with
the DIGI LINK function.
This function uses the CEC
(Consumer Electronics Control)
protocol.
CEC allows external devices which are con-
nected to the HDMI sockets by an HDMI cable
(e.g. DVD player) to be operated with a remote
control.
Prerequisite is that the devices connected sup-
port CEC. Read the operating manual for the
external device to find out how to activate the
corresponding function.
The­DIGI­LINK­functions­on­your­
television
Switching­on­the­television­automati-
cally­from­standby
If the external device (e.g. Blu-ray player) is
switched on, the television also switches on and
the appropriate HDMI preset is selected auto-
matically.
Depending on the features of the external de-
vice, the external device (e.g. AV receiver) can
be switched on alone, the television stays in
standby.
Automatic­selection­of­the­HDMI­preset­
on­the­television
If your television is switched on and you then
switch on the external device (e.g. DVD player),
the appropriate HDMI preset on the television
will be selected.
Selecting­the­menu­language
The television menu language is automatically
selected on the external device (e.g. DVD
player).
The external device must support this function.
OPERATION­USING­EXTERNAL­DEVICES
­------------------------
Switching­off­the­external­device­
automatically
If you switch your television to standby, the
external device (if it is switched on) will also be
switched to standby.
DIGI LINK is always active on your television
set.
Searching­for­and­activating­­
external­devices
You can connect up to 11 devices with
DIGI LINK functions to your television.
1­ Open the Tools menu with » TOOLS «.
2­
Select the menu item »CEC« with »
V
« or
»
Λ
« and press »
OK
« to confirm.
– The »HDMI CEC Device List« appears.
3­ Start the device search with »

« (red).
– The devices found are displayed in the
menu.
4­ Select the device for operation with »
V
«,
»
Λ
«, »
<
« or »
>
« and press » OK « to mark
it.
– If the selected device is connected to a
different input to the current one, a switch
to the respective input will occur auto-
matically.
5­
Press »
MENU
« to end the setting.