Grundfos TP 100-160 Product Manual Download Page 42

Page: 42 / 52

Inst

allatio

TPE E-circulators

Electrical installation

Electrical connection

Carry out electrical connection and protection in accor-
dance with local regulations.

• Electronically speed-controlled pumps must always

be correctly grounded.

• Single-phase standard motors incorporate a thermal

switch and require no additional thermal motor
protection.

Note:

Carry out the mains connection of the pump as

shown in the diagram inside the terminal box cover.

Do not start the pump until it has been filled with liquid
and vented.

Protection

Protection against fault currents

If the pump is connected to an electric installation
where an earth leakage circuit breaker (ELCB) is used
as additional protection, the earth leakage circuit
breaker must be marked with the following symbols.

The earth leakage circuit breaker

must

trip out when

earth fault currents with DC content (pulsating DC) and
smooth DC earth fault currents occur.

Communication cables for TPE

Use screened cables (min. 0.5 mm

) for external on/off

switch, digital input, sensor and and setpoint signals.
The screens of the cables should be connected to
frame at both ends.

The screen of the cable must have good frame
connection which must be as close as possible to the
terminals.

Fig. 16

External start/stop cable connection of TPE

Use a screened 2-core cable for the bus connection.
Connect the screen to terminal Y at both ends.

Fig. 17

Bus connection of TPE

Screen

E-circulator.book Page 42 Friday, October 7, 2011 4:01 PM

Summary of Contents for TP 100-160





















































Search results

Summary of Contents for TP 100-160

Reviews:

Related manuals for TP 100-160

Brands by name

Popular brands

Grundfos TP 100-160, Product Manual

Search results

Summary of Contents for TP 100-160

Reviews:

Related manuals for TP 100-160

Brands by name

Popular brands