Grundfos TP 100-160 Product Manual Download Page 14

Page: 14 / 52

TPE Series

2000 pump

TPE E-circulators

8. TPE Series 2000 pumps

Fig. 5

TPE

Technical data

Flow rate:

up to 200 gpm (45 m

Head:

up to 60 ft (18 m)

Liquid temperature:

–13 to +284 °F
(–25 ° to 140 °C)

Max. operating pressure:

145 psi (10 bar)

Motor sizes (single-phase): 0.33 to 1.5 hp

Construction

TPE Series 2000 pumps are based on TP pumps.

The main differences between the TP and the TPE
Series 2000 pump range are the motor and the
factory-fitted integrated differential pressure sensor.

The motor of TPE Series 2000 pumps has a built-in
variable frequency drive designed to continuously
regulate the pressure based on the flow demand.

The TPE Series 2000 range is recognized as a
pre-configured solution for quick and safe installation.

For further information on construction and materials
of TPE Series 2000 pumps, see page 12.

Applications

TPE Series 2000 pumps have integrated speed control
for automatic adaptation of performance to current
conditions.

This ensures that the energy consumption is kept at a
minimum.

TPE Series 2000 pumps can operate in any duty point
within the range between 25 % and 100 % speed.

In the QH-chart the 100 %-curve corresponds to the
curve for a pump fitted with a standard fixed-speed
motor.

Depending on the nature of the application, TPE
Series 2000 pumps offer energy-savings, increased
comfort or improved processing.

TPE Series 2000 pumps are suitable for applications
where you want to control the pressure.

348

9 05

Q [US GPM]

[ft]

100%

25%

E-circulator.book Page 14 Friday, October 7, 2011 4:01 PM

Summary of Contents for TP 100-160





















































Search results

Summary of Contents for TP 100-160

Reviews:

Related manuals for TP 100-160

Brands by name

Popular brands

Grundfos TP 100-160, Product Manual

Search results

Summary of Contents for TP 100-160

Reviews:

Related manuals for TP 100-160

Brands by name

Popular brands