background image

LIMITED WARRANTY

All Redi-Flo products manufactured by GRUNDFOS are warranted to the
original user only to be free of defects in material and workmanship for the
following periods of time.  Redi-Flo VFD and Redi-Flo4™ variable performance
pumps:  18 months from the date of installation, but not more than 24 months
from the date of manufacture;  Redi-Flo2® pumps; 12 months from date of
installation, but not more than 18 months from the date of manufacture,
whichever comes first.

GRUNDFOS' liability under this warranty shall be limited to repairing or
replacing at GRUNDFOS' option, without charge, F.O.B. GRUNDFOS' factory
or authorized service station, any product of GRUNDFOS manufacture.
GRUNDFOS will not be liable for any costs of removal, installation, transportation,
or any other charges which may arise in connection with a warranty claim.
Products which are sold but not manufactured by GRUNDFOS are subject to
the warranty provided by the manufacturer of said products and not by
GRUNDFOS' warranty.  GRUNDFOS will not be liable for damage or wear to
products caused by abnormal operating conditions, accident, abuse, misuse,
unauthorized alteration or repair, or if the product was not installed in accordance
with GRUNDFOS' printed installation and operation instructions.

To obtain service under this warranty, contact the Distributor or Dealer from
which it was purchased to obtain instructions. Under no circumstances
should defective product be returned to the Distributor, Dealer, or
GRUNDFOS without a Return Materials Authorization (RMA).

GRUNDFOS WILL NOT BE LIABLE FOR ANY INCIDENTAL OR
CONSEQUENTIAL DAMAGES, LOSSES, OR EXPENSES ARISING FROM
INSTALLATION, USE, OR ANY OTHER CAUSES. THERE ARE NO EXPRESS
OR IMPLIED WARRANTIES, INCLUDING MERCHANTABILITY OR FITNESS
FOR A PARTICULAR PURPOSE, WHICH EXTEND BEYOND THOSE
WARRANTIES DESCRIBED OR REFERRED TO ABOVE.

Some jurisdictions do not allow the exclusion or limitation of incidental or
consequential damages and some jurisdictions do not allow limitations on how
long implied warranties may last. Therefore, the above limitations or exclusions
may not apply to you. This warranty gives you specific legal rights and you may
also have other rights which vary from jurisdiction to jurisdiction.

LIMITED WARRANTY

L-RF-IO-006       06/00

PRINTED IN USA

Installation and

Operating Instructions

Redi-Flo Variable

 Performance Pumps

Please leave these instructions with the

Redi-Flo equipment for future reference

Grundfos Pumps Corporation • 3131 N. Business Park Ave., Fresno, CA 93727

Customer Service Centers: Allentown, PA 

• 

Fresno, CA

Phone (800) 333-1366 • Fax (800) 333-1363

Canada:  Oakville, ONT • Mexico:  Apodaca, N.L.

Visit our website at www.us.grundfos.com

TR'sVFDIO.p65

5/31/00, 9:02 AM

1

Summary of Contents for Redi-Flo 2





































Reviews: