English (GB)
3
English (GB)
Service instructions
Original service instructions
CONTENTS
Page
1. Symbols used in this document
1.1 Warnings against hazards involving risk of death
or personal injury
1.2 Other important notes
Warnings against hazards involving risk of death or
personal injury
Replacing the terminal box cover
Replacing the functional module
7.10 Replacing the stator housing
7.12 Replacing the bearings (MGE 100 and below)
7.13 Replacing the bearings (MGE 112, 132, 160)
7.14 Replacing the IP66 gamma rings
7.15 Configuring the controller
Read this document before starting service work on
the product. Installation and service work must
comply with local regulations and accepted codes of
good practice.
Observe the safety instructions in the installation and
operating instructions for the product.
CAUTION
Indicates a hazardous situation which, if not avoided,
could result in minor or moderate personal injury.
WARNING
Indicates a hazardous situation which, if not avoided,
could result in death or serious personal injury.
DANGER
Indicates a hazardous situation which, if not avoided,
will result in death or serious personal injury.
A blue or grey circle with a white graphical symbol
indicates that an action must be taken.
If these instructions are not observed, it may result in
malfunction or damage to the equipment.
Tips and advice that make the work easier.
Summary of Contents for MGE 100
