K-Series
I/O Manual
Prepared by.
Rev. No.
0
Date.
11-Jan-11
Page.
12 / 25
5.4
Dry pit installation
•
In the Dry pit installation, the pump will be installed in a stationary position of
the dry well next to the wet sump.
•
The pump has a watertight motor therefore wouldn’t be damaged in the event
of flooding .
•
The pump is equipped with a cooling jacket.
•
In addition to, the following items are required:
-
Plate and anchor bolts for anchoring the pump to a concrete base.
-
Base stand and suction connection are integrated .
-
Bolt the suction cover to the concrete base by means of four grouted-in
anchor bolts .
-
Bolt the pump to the suction connection .
-
Check that the pump is vertical .
-
Connect the motor cable, suction line and discharge line .
•
Make sure that the weight of the pump does not bear on the system piping.
fig. 8
