Grundfos DUOLIFT Series, Installation And Operating Instructions Manual

Page: 6 / 464

En
gl
is
h (
G
B)
6
2. Receiving the product
2.1 Transporting the product
2.2 Inspecting the product
1. Check that the product is as ordered.
2. Check that no visible parts have been damaged.
3. If parts are damaged or missing, contact your
local Grundfos sales company and refer to the
product numbers in section
2.3 Scope of delivery .
2.3 Scope of delivery
The scope of delivery depends on your order.
Pumps, tank and pipes are supplied separately and
must be assembled.
Before the pump is returned to Grundfos for service,
the safety declaration at the end of these instructions
must be filled in by authorised personnel and
attached to the pump in a visible position.
If Grundfos is requested to service the pump, it must
be cleaned before it is returned.
If proper cleaning is not possible, all relevant
information about the pumped liquid must be
provided.
If the above is not fulfilled, Grundfos can refuse to
accept the pump for service.
Possible costs of returning the pump are to be paid
by the customer.
The safety declaration can be found at the end of these
instructions (only in English).
2.3.1 Description of kits
WARNING
Falling objects
Death or serious personal injury
- Secure the product during
transportation to prevent it from tilting or
falling down.
CAUTION
Back injury
Minor or moderate personal injury
- Get assistance from another person or
use lifting equipment to carry the
product.
CAUTION
Crushing of feet
Minor or moderate personal injury
- Wear safety shoes when moving the
product.
Caution
If used for a liquid which is injurious to
health or toxic, the pump will be classified
as contaminated.
Tank
Designation
Quantity
270 litres 540 litres
Tank 1 1
Cover with gasket 1 2
Screw, M8 x 30 12 24
Washer 12 24
Fastening bracket for
level sensor tube
2 2
Screw for fixing the tank 4 4
Expansion anchor for
fixing the tank
4 4
Socket seal, DN 40 1 1
Socket seal, DN 100 1 1