English (GB)
33
11.7 Main menu
•
From display mode, press [OK] or from the
submenus, press [Esc] the relevant number of
times to access the main menu.
Selection options in the main menu
•
"Sensor 1 / Sensor 2": parameterisation of
sensors. Menu selection "Sensor 1" or "Sensor 2"
for parameterisation is displayed in the "Setup"
menu, depending on the preselection.
•
"Service" diagnostic menu (list of events): display
of measured values, current output, relay and
display test. Values cannot be changed in this
mode.
•
"Setup" menu: settings for language, sensors,
relays, battery backup, current output, etc.
•
"Fine adjustment" menu: sensor calibration and
display damping.
11.8 Setup
All standard settings of the device can be configured
in the "Setup" menu. During initial commissioning,
basic functions are configured which after that
should only be altered rarely or even not at all.
11.8.1 Selecting the operating language
In the "Language" submenu, the language is
selected for all subsequent entries and displayed
text.
The word "Language" appears in the header in each
of the available languages, changing about once
every second. The list of available languages
(English, German, French, Spanish, Russian, Polish)
is displayed.
Select the desired language.
Note
In the following, unlike the menu
sequence, the device setup is described
first because it is completed first when
setting the device for the first time.
Main menu > Setup
Submenu 1
Language
Sensor 1
Sensor 2
Limit relay
Alarm relay
Battery backup
Date/time
Code function
Display
Factory setting
CAN interface
Current output
Program version
Note
Once the code has been set, access to the
"Setup" menu requires level 2 rights. See
section
.
Sprache..Language..
Deutsch
English
Español
Français
Note
Changing the language does not affect any
set values.
