8. Configuring inputs in Grundfos GO Remote
8.1 Configuring an outdoor temperature sensor input
and outdoor temperature compensation
When setting an outdoor temperature sensor input in Grundfos GO
Remote, you have the option to configure the function
Outdoor
temperature compensation
as well.
Grundfos GO Remote menu:
Main menu
>
Settings
>
Setpoint
1.
Press
Reconfigure setpoint input
at the bottom of the screen.
2.
Select
Outdoor temperature sensor
and press
Next
.
3.
Select outdoor sensor type, either Pt1000 or 0-10 V, and press
Next
.
a. If a 0-10 V sensor is selected, you must define its range.
4.
Configure a heat curve to set the
Outdoor temperature
compensation
function.
a. Offset and slope
Alter the heat curve by the means of offset and slope. Use
the temperature buttons to adjust the offset, and use the
Up
and
Down
buttons to adjust the slope of the curve.
Press
Next
or customise the heat curve, see step B.
b. Customised heat curve (optional)
Press
Customise heat curve
and define the desired
setpoints for each of the five outdoor temperature points.
5.
Connect a cable to MIXIT. Follow the instructions given in
Grundfos GO Remote and press
Next
.
6.
A summary is given. Press
Save
to complete the setup.
8.2 Configuring a setpoint from analog input
Grundfos GO Remote menu:
Main menu
>
Settings
>
Setpoint
1.
Press
Configure setpoint input
at the bottom of the screen.
2.
Select
Setpoint from analog input
and press
Next
.
3.
Select signal type and press
Next
.
Select 0-10 V, 0-20 mA or 4-20 mA.
4.
Define the range and press
Next
.
5.
Connect a cable to MIXIT. Follow the instructions given by
Grundfos GO Remote. Press
Next
.
6.
A summary is given. Press
Save
to complete the setup.
21
English (GB)
