background image

Installation and

Operating Instructions

Please leave these instructions with the pump for future reference

Grundfos Pumps Corporation  • 3131 N. Business Park Ave., Fresno, CA 93727

Customer Service Centers: Allentown, PA • Fresno, CA

Phone: (800) 333-1366 • Fax: (800) 333-1363

Canada: Oakville, Ontario • Mexico: Apodaca, N.L.

Visit our website at www.us.grundfos.com

Products manufactured by GRUNDFOS are warranted to the original user only to be free
of defects in material  and workmanship for a period of 18 months from date of installation,
but not more than 24 months from date of manufacture. GRUNDFOS' liability under this
warranty shall be limited to repairing or replacing at GRUNDFOS' option, without charge,
F.O.B. GRUNDFOS factory or authorized service station, any product of GRUNDFOS
manufacture. GRUNDFOS will not be liable for any costs of removal, installation,
transportation, or any other charges which may arise in connection with a warranty claim.
Products which are sold but not manufactured by GRUNDFOS are subject to the warranty
provided by the manufacturer of said products and not by GRUNDFOS' warranty. GRUNDFOS
will not be liable for damage or wear to products caused by abnormal operating conditions,
accident, abuse, misuse, unauthorized alteration or repair, or if the product was not installed
in accordance with GRUNDFOS printed installation and operating instructions.

To obtain service under this warranty, the defective product must be returned to the
distributor or dealer of GRUNDFOS  products from which it was purchased together with
proof of purchase and installation date, failure date, and supporting installation data. Unless
otherwise provided, the distributor or dealer will contact GRUNDFOS or an authorized
service station for instructions. Any defective product to be returned to GRUNDFOS  or a
service station must be sent freight prepaid; documentation supporting the warranty claim
and/or a Return Material Authorization must be included if so instructed.

MANUFACTURER WILL NOT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL
DAMAGES, LOSSES, OR EXPENSES ARISING FROM INSTALLATION, USE, OR ANY
OTHER CAUSES. THERE ARE NO EXPRESS OR IMPLIED WARRANTIES, INCLUDING
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, WHICH EXTEND
BEYOND THOSE WARRANTIES DESCRIBED OR REFERRED TO ABOVE. EXCEPT
AS EXPRESSLY HEREIN PROVIDED THE GOODS ARE SOLD "AS IS", THE ENTIRE
RISK AS TO QUALITY AND FITNESS FOR A PARTICULAR PURPOSE, AND
PERFORMANCE OF THE GOODS IS WITH THE BUYER, AND SHOULD THE GOODS
PROVE DEFECTIVE FOLLOWING THEIR PURCHASE, THE BUYER AND NOT THE
MANUFACTURER, DISTRIBUTOR, OR RETAILER ASSUMES THE ENTIRE RISK OF
ALL NECESSARY SERVICING OR REPAIR.

Some jurisdictions do not allow the exclusion or limitation of implied warranties of
merchantability and fitness for a particular purpose, of incidental or consequential damages
and some jurisdictions do not allow limitations on how long implied warranties may last or
require you to pay certain expenses as set forth above. Therefore, the above limitations or
exclusions may not apply to you. This warranty gives you specific legal rights and you may
also have other rights which vary from jurisdiction to jurisdiction.

The telephone number of our service and repair facilities central directory, from which you
can obtain the locations of our service and repair facilities is, 1-800-333-1366.

LIMITED WARRANTY

Federal Communications Commission  Notice:
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC
Rules.  These limits are designed to provide reasonable protection against harmful interference when the equipment is operated
in a commercial environment.  This equipment generates, uses, and can radiate radio frequency energy and, if not installed and
used in accordance with the instruction manual, may cause harmful interference to radio communications.  Operation of this
equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the
interference at his own expense.

Efficient Permanent Magnet
Motor

High Starting Torque

Soft Start
(2 seconds to reach maximum
rpm, and  maximum pressure)

Built-in "Smart" Motor
Protection with automatic
restart

Communication Through the
Redi-Flo3 Status Box

Integrated Protection Against
Adverse Conditions

Environmental Materials of
Construction

L-RF-IO-008

 

Rev.2/00

      PRINTED IN USA

SQE-NE

Environmental Pumps

Summary of Contents for 10SQE03A-100-NE





















Reviews: