Deferrisation
GENO-mat FE-Z Deferrisation System
Order no. 025 153 940-inter Edited by: nkes-mrie G:\BA-153940-INTER_025_GENO-MAT_FE-Z.DOC
28
3.1.1 Oxidising agents
Designated area of application:
Oxidising agents are used for the regeneration and disinfection of
GENO-mat
FE-Z deferrisation systems. Furthermore, they are dosed
upstream of GENO-mat
FE-Z deferrisation systems in order to com-
pletely oxidise iron II compounds.
The dosing and the dosing volumes depend on the iron concentra-
tions contained in the raw water.
You can use either our GENO-Spezialgranulat
1)
agent or
GENO-oxi plus (liquid).
3.1.2 Preparing the regeneration agent
Fill the regeneration tank with filtered water (for respective quanti-
ties refer to Table G-1). We recommend installing a filling tap in the
pure water pipe for this purpose.
Pour the GENO-Spezialgranulat (special granulate)
1)
or GENO-oxi
plus into the tank and mix by means of the integrated hand mixer
until the special granulate has dissolved completely.
Install a suction hose between the regeneration tank and the ball
valve at the control valve.
1)
Note:
Registration by the Federal Surveillance Authority for Opium
according to the Controlled Substances and Precursors Act required.
Table G-1: Amount of regeneration agent
required
GENO-mat
FE-Z deferrisation system
20/10 25/13 30/14 40/17 40/18 50/19 60/20
Preparation amount
[l] 30
2)
50
2)
60
2)
100
2)
100
2)
200
2)
300
2)
GENO-oxi plus
[l]
5
9
11
17
17
35
53
GENO-Spezialgranulat
1)
[g] 105
175
210
350
350
700
1050
2)
If the liquid product GENO-oxi plus is used, the GENO-oxi plus amount must be subtracted from the prepara-
tion amount.
