37
8.3
Output signals
Output signal (PIN 4)
Description
Chapter
high, permanent
ready for operation
8
high, permanent
received control signal
8
low, 7...17 seconds
dispensing process
8
0.5Hz square wave signal, permanent
cartridge empty
8.3.1
low, permanent
error
If an output signal as low level (0V) is permanently present at PIN 4 for longer than 3s
and no dispensing process is currently being performed by LUB-D, there is an error at
LUB-D. The signals only inform about the fact that an error occured, the cause must be
determined and eliminated by the operator. Chapters 8.3.2, 8.3.3 and 8.3.4 provide a
procedure and possible causes for error messages.
Summary of Contents for Lubricus LUB-D Series
Page 1: ...User manual LUB D...
