20
113463_64_65HBC Revision date: 08.27.19
8
Spin Handle Installation
Gather parts:
• 103395 spin handle & 131P036 spin handle extension
• 103396 universal joint & FA4474B Tek screws
• 166P006 easy spin for handle
• QH1400C spin handle hook
• FAMF01B fender washer for handle hook installation
With cover material installed and roll-up conduits attached to both edges of cover,
continue by assembling and attaching spin handles.
SPIN HANDLE INSTALLATION
Complete these steps:
1. Attach spin handle to 36" extension pipe using one (1) Tek screw.
2. Slide 6" easy spin pipe (166P006) onto free end of 36" extension pipe.
3. Attach universal joint to end of 36" extension pipe.
4. Attach assembly to roll-up cover conduit.
5. Repeat steps to assemble and attach remaining spin handle.
6. Roll cover to peak of frame. Use spin handle length to judge position of handle hook. Attach hook to end rafter using Tek screw and fender washer.
QH1400C
Handle Hook
Tek Screw &
Washer
Step 3
Step 4
Step 1
166P006
Step 2
166P006
Easy Spin – This
pipe slides on
extension pipe.
131P036
Extension Pipe
103396
Universal Joint
QH1400C
103395
Spin Handle
Cover is shown fully opened with
spin handle in locked position.
