Grouw! 18183, Instruction Manual

Page: 44 / 103

44
Check that there are no nails, screws or other
objects that could damage the saw chain
in the item to be cut, and that there are no
similar hindrances in the vicinity that could
damage the pruning saw.
Ensure that you do not accidentally cut
power or telephone cables, etc. and always
make sure there are no other people or
animals near the saw chain when starting or
using the pruning saw.
Remove the saw chain from the item being
cut while it is still running. If the saw chain
stops while it is in the workpiece, it can pull
the operator forward and cause injury.
Always take the battery out of the pruning
saw after use, if it gets stuck and needs to be
released and before cleaning the pruning
saw.
Always replace the protective cover on the
blade when transporting or storing the
pruning saw.
Safety instructions for battery and
charger
Do not try to charge other batteries using
the charger even if they have the same
specifi cations as the battery provided.
Do not try to charge the battery using a
di
ff erent charger even if it has the same
specifi cations as the charger provided.
Protect the charger’s and the battery’s
terminals when the parts are not in use. If
they come into contact with liquids, metal
parts or other conductive materials, the
charger or battery may short circuit.
Never use the charger if the battery, charger
or cord is damaged.
The battery must only be charged indoors at
an ambient temperature of 5-40
° C.
The battery and charger may get hot during
charging. This is completely normal.
Use only batteries and chargers that are
speci
fi cally designed for this pruning saw.
If the battery is not to be used for a
prolonged period, you must charge it up to
50-70% before storing it and then recharge it
again every three months.