Page 22 / 146
00BNO9061-L
VARMAX -
Installation, Use and Maintenance
fi
gure 9 - Removing side panels
U0501963-#
handle
4.6. Removing / re
fi
tting side panels
Open the casing doors.
Remove the locking screw accessible via the
inside of the boiler.
Use the handle in the centre of the panel for this.
Lift up the panel vertically and remove.
When re
fi
tting, re-fasten the locking screws from
inside the boiler after
fi
tting the panels.
Note: It may be necessary to remove the rear side
panels in order to
fi
t through doors. To do
this, unscrew the
fi
xing screws which hold the
panel onto the boiler's structure and remove
the panel.
4.7. Removing / re
fi
tting the top panel
Open the casing doors.
Loosen the 2 thumbscrews on the top of the boiler
(1 or 2 turns will be enough. It is not necessary or
recommended to unscrew them completely).
Slightly lift up the panel and remove it from the
front.
To re
fi
t it, follow the procedure in reverse.
fi
gure 10 - Removing the upper panel
locking
screw
rear side panel
U0502250-#
removable part
