www.gronomics.com
East Bethel, MN USA
763-753-7374
Continued
7
Leg Assemblies
Place the leg assemblies on the ground (as
shown).
Rotate the leg assembly shown on the right up.
Align the lower leg brace (Item 4) and screws
(Item 8) with the pre-drilled holes of the leg
assembly on the right.
Tighten screws fi rmly but do not fully tighten.
Rotate This
Side Up and
Align Lower Leg
Brace Holes With
Lower Leg Brace
Located on Left
Leg Assembly
4
Lower
Leg
Brace
Holes
6
Final Lower Leg Brace Assembly
8
Stand the leg assemblies up (as shown).
Locate the one remaining 2” x 6” x 24-1/2” lower leg brace
(Item 6). Install four 5/16” x 4” screws (Item 6) in the pre-
drilled holes of the lower leg brace.
Align the lower leg brace and screws with the pre-drilled
holes of the leg assemblies.
Tighten screws fi rmly but do not fully tighten
6
4
9
Upper Leg Brace Assembly
Locate the 2’ x 6” x 15” upper leg brace (Item 5). Install
four 5/16” x 4” screws (Item 6) in the pre-drilled holes of the
upper leg brace.
Align the upper leg brace and screws with the pre-drilled
holes of the leg assemblies.
Tighten screws fi rmly but do not fully tighten.
Repeat procedure on opposite side with the one remaining
upper leg brace.
5
6
