background image

www.gronomics.com 

East Bethel, MN USA 

763-753-7374

Continued

1

Box 1 of 2

ITEM

QTY.

PART #

DESCRIPTION

1

2

PTBT4200-X

Corner Posts, 3-1/4” x 3-1/4” x 42” (X)

2

2

PTBT4200-O

Corner Posts, 3-1/4” x 3-1/4” x 42” (O)

3

2

TTSB2638

Table Top Side Braces, 2” x 6” x 38” With 2 x 2 x 38” Cleat

4

4

TTLLB2624

Table Top Lower Leg Braces, 2” x 6” x 24-1/2”

5

2

TTULB2615

Table Top Upper Leg Braces, 2” x 6” x 15”

6

32

RSS516-4ZY

GRK RSS Screws, 5/16” x 4”

7

28

RSS516-212ZY GRK RSS Screws, 5/16” x 2-1/2”

Picnic Table Bar Top

(39” x 39” x 42”H)

 

Assembly Instruction

1

Parts Identifi cation Box 1

Stack matching pieces in piles. Using the 
parts list, locate and count the individual 
pieces and verify that you have received 
the correct number of pieces.

If any pieces are missing or replacement 
parts are required, contact Gronomics at 
1-855-299-6727.

NOTE: It is recommended to place a 
protective layer between the ground and 
the pieces during assembly. This will help 
prevent damage to the pieces. 

3

Item #: PTBT 39-39

Packaged & Inspected by:

Date:

7

6

Torx® T30

Product Care & Maintenance

Western Red Cedar will turn a weathered grey if left unfi nished. Although no fi nish is required for cedar when used outdoors,
a natural oil fi nish applied regularly will help maintain the beauty and minimize cracking and drying. It is recommended
to use Gronomics Garden Bed Oil (Item# GBO-1Q), a non-toxic, food safe fi nish that is very easy to apply.

Apply oil when air and wind temperatures are between 50-90 degrees. Avoid applying in direct sunlight.

5

4

2

Summary of Contents for PTBT 39-39








Reviews: