![background image](http://html1.mh-extra.com/html/grone-0/2540-281600/2540-281600_user-manual_2269699027.webp)
27
Work speed regulation
The sabre saw blade is equipped with a 6-degree speed control thumbwheel (4). By using it we can
regulate the speed from 1000 up to 2800 strokes per minute. Remember that the tool features the soft-
start function and the full speed is achieved after a couple of seconds. We apply high cutting speed
in soft materials (wood, rubber), whereas in metals and hard materials lower speed should be used.
In order to regulate the strokes, set the intended speed with a speed control thumbwheel (4) (Fig. 6).
4
Fig. 6
CLEANING AND MAIN TENANCE:
Unplugging the po wer cord from the socket or disconnecting the battery is an absolute necessity be-
fore the maintenance work is started!
Any maintenance wor ks or repairs requiring removal of the engine housing must be done by the main
service provider or by authorised service providers.
Keep the tool and t he handles dry and clean. Keep clear of grease and oil. Ventilation slots should not
be obstructed.
Check regularly all the external parts of the tool and control the proper functioning of the switches.
Do not use the tool if any of its parts are broken or a switch does not work properly.
Apply damp cloth to the outer surfaces of the casing. Do not use running water or sprayers. Do not use
aggressive or caustic chemical agents including petrol, solvents or other petroleum-derived agents.
No more than after 50 hours of work or more often, if the tool operates in high dust, make sure to clean
the machine with compressed air. Pay particular attention to cleaning of the blade mounting and ven-
tilation outlets. Do not use oil nor grease for maintenance and cleaning of the blade mounting system.
Use only blades dedicated by the tool’s manufacturer.
Wear protective eye wear while cleaning the machine with compressed air!
Summary of Contents for 2540-281600
