![background image](http://html1.mh-extra.com/html/grone-0/2540-281600/2540-281600_user-manual_2269699024.webp)
24
1
3
2
10
Fig. 3
Disassembly of the working tool (1) is done in the same method. If it is necessary, release the screw
and slide out the limiter (2). Turn the collar clockwise, remove the saw blade (1) and release the block-
ing collar.
Make sure the limiter (2) is properly mounted before you start work.
Wear protective gloves! Risk of injury with a sharp saw blade. After work is fi nished, the saw blade can
be hot.
TOOL START-UP:
Switching on / switching off / continuous work mode
Avoid un intentional start-ups! Always switch off the tool before you unplug the cord from the socket or
in case of power failure.
In order to turn on the tool, press the switch on button (7). The tool is equipped with a soft-start func-
tion which allows the operator to properly place the limiter and set correct cutting line. The number
of strokes of the object can be adjusted by pressing harder the switch button (7).
To switch off the machine, release the on/off switch button (7).
In order to start continuous operation mode, use a continuous operation lock button (5) to lock
a pressed-in ON / OFF switch (7). To switch off the continuous operation mode, press again the ON /
OFF switch (7) (Fig 4).
After switching off the continuous operation mode, the tool will still be working even when it falls off
the hand of the operator! Hold the tool with both hands by the intended handles!
Summary of Contents for 2540-281600
