14
TIMER FEATURE FOR OPTIMAL TREATMENT
One of the main problems with manual dermaneedling is to figure out how many times
to roll over the skin for optimum treatment. This involves complex maths because it
depends on how wide the roller head is, how many needles are in the roller, the
circumference of the roller head and of course the size of the skin area.
With the Derminator
®
2, you only need to tell it the size of the skin area and the
machine will simply switch off when you’ve treated the skin optimally. As long as you
keep moving the device over the to be treated skin patch, the device will take care of
the rest. You can even change pulsing frequency meanwhile. The Derminator
®
2 knows
how many pricks need to be made on the skin and when the skin patch has that number
of pricks, it stops. That’s all there is to it. And when you want to be conservative, you
just stop sooner.
This “automatic mode” is done via the “Timer” function.
Timer mode is entered by pressing the right, blue “Depth” button marked
[OK]
when
the display shows
“Timer”
. The device then asks whether to use inches or cm:
Use in
2
or cm
2
?
[in
2
] [cm
2
]
After having selected the appropriate metric (by pressing the corresponding button
below the text), the skin width and length is entered by pressing the corresponding
buttons as many times as necessary. The left button increases the Length or Width.
Length skin area
[1] [OK]
Pressing the left button increases the value. Pressing the right button accept the
entered value, and the next screen appears:
Width skin area?
[1] [OK]
