MSFI
-
F801306
4
Mounting and Clearance
Pump Clearance Requirements
Select a suitable mounting point for the pump on the machinery, preferably in a position where it is protected from debris. Ensure adequate clear-
ance for the looming and re
-
filling is provided (see image below for clearance allowances). Do not mount the pump onto ancillary equipment.
Using the pump
-
mounted adhesive template (part number 31867
-
900), supplied, position and drill the bracket holes (mounting positions and
bracket clearances detailed as per the above image). Use bolts, nuts and spring washers supplied to securely mount the pump in position. If your
application requires filling from the top
-
fill cap, be sure to allow at least 75mm clearance for access.
75mm
(3”)
Filler Access
50mm
(2”)
Loom Clearance
270mm
(10.63”)
270mm
(10.63”)
12 an
d
24 P
o
rt
B
rac
ke
ts
248m
m
(9.7
6”)
36 P
o
rt
B
rac
ke
ts
278m
m
(10.
94”)
Summary of Contents for MSFi
Page 20: ......
