Groen TDH, Operator'S Manual

Page: 5 / 36

5
OM-TDH
OM-TDH
5
The TDH and TDHC are shipped from the factory
strapped on a pallet.
Inspection & Unpacking
The unit arrives completely assembled, except for the
tilting handle on TDH models which is shipped inside
the kettle. The unit is strapped on a skid and in a
heavy carton. Inspect the carton carefully for
damage. Open the container and check the unit for
hidden damage. Report shipping damage or shipment
errors to the delivery agent.
CAUTION
SHIPPING STRAPS ARE UNDER TENSION
AND CAN SNAP BACK WHEN CUT. TAKE
CARE TO AVOID PERSONAL INJURY OR
DAMAGE TO THE UNIT BY STAPLES LEFT
IN THE WALLS OF THE CARTON.
Write down the model number, serial number, and
installation date for your unit at the top of the
Service Log on Page 30. Keep this manual with the
unit.
CAUTION
UNIT WEIGHS FROM 215 LBS. (98 KG) TO 240
LBS. (109 KG). INSTALLER SHOULD OBTAIN
HELP AS NEEDED TO LIFT THIS WEIGHT
SAFELY.
To remove the kettle from the box, cut any straps from
around the box. Detach the box sides from the skid.
Pull the box up off the unit, taking care to avoid
damage or injury from any staples left in the box
walls. When installation is to begin, cut the straps
holding the kettle on the skid, and lift the kettle
straight up off the skid. Examine the packing materials
to make sure no loose parts are discarded with the
materials. On TDH models, the tilting handle may be
screwed into its socket. Attach handle to the kettle on
left side or right side as shown below.