OM-TDB 5
Equipment Description
The Groen TDB and TDBC are table top, tilting,
steam jacketed kettles with a thermostatically
controlled, self-contained, electrically-heated
steam supply and appropriate controls, mounted
on a sturdy base. Models TDB and TDBC are
available in 20 or 40 - quart capacity.
The body of the TDB and TDBC Kettle is
constructed of stainless steel, welded into one
solid piece. The kettle is furnished with a
reinforced rim and a butterfly shaped pouring lip.
It has a steam jacket rated for a design pressure
of 50 PSIG. Kettle finish is 180 emery grit on the
inside and bright semi-deluxe on the outside. A
tilt handle on the TDB kettle and a handwheel
crank on the TDBC kettle allows the operator to
manually tilt the kettle body in a controlled
manner. Pouring height accepts pans up to four
inches high on a table top.
A built-in steam generator, sized for the kettle
capacity and heated by electricity, delivers steam
into the jacket. “Airless” operation of the steam
jacket permits uniform, efficient heating at
temperatures as low as 150°F and as high as
295°F. In addition to the adjustable thermostat
for operating control, the unit has a tilt cut-off
switch, low water cut-off, pressure relief valve,
and high-limit pressure switch as safety features.
A heating indicator light, pressure gauge, and
sight glass are provided for monitoring kettle
operation.
A single electrical connection is required for
installation. The unit may be ordered for use
with 208/240 or 480 volt power. All kettles are
wired for 208 volt, three-phase operation. For
240 volt, three-phase OR single-phase
conversion, see the wiring diagrams and
installation instructions in this manual.
KETTLE CHARACTERISTICS
TDB-20 and TDBC-20
TDB-40 and TDBC-40
Kettle Capacity
20 qts.
18.8 liters
40 qts.
37.6 liters
Jacket Capacity
7 qts.
6.6 liters
9 qts.
8.5 liters
Diameter
14”
36 cm
16-1/2”
42 cm
Depth
11”
28 cm
14-1/4”
36 cm
K.W. at 208 V
6.3
10.8
K.W. at 240 V
8.4
14.4
K.W. at 480 V
6.3
12.0
Base Width
24”
60 cm
28”
60 cm
Base Depth
16”
41 cm
16”
41 cm
Options available include:
1. Kit, cover and holder (P/N 139805, 20 quart - P/N 139806, 40 quart).
2. One-piece, lift-off cover (P/N 128003, 20 quart - P/N 128002, 40 quart).
3. Holder for Lift-off cover (P/N 133837).
4. Basket insert (P/N 001159, 20 quart - P/N 001161, 40 quart).
5. Rice Strainer (P/N 005187, 20 quart - P/N 005186, 40 quart).
6. Stand that supports the unit and holds a pan in position for filling (Model TS-9).
7. Water fill swing faucet.
8. 316 stainless steel interior (must be ordered with original equipment order).
9. Agitators with motor drives (must be ordered with original equipment order).
5
OM-TDB
5
OM-TDB 5
Summary of Contents for TDB
Page 19: ...OM TDB 19 PARTS LIST TDB 20E 40E ...
Page 20: ...20 OM TDB PARTS LIST TDB 20E 40E ...
Page 21: ...OM TDB 21 PARTS LIST TDB 20E 40E ...
