6 OM-TDB/6
Inspection & Unpacking
CAUTION
SHIPPING STRAPS ARE UNDER TENSION
AND CAN SNAP BACK WHEN CUT. TAKE
CARE TO AVOID PERSONAL INJURY OR
DAMAGE TO THE UNIT BY STAPLES LEFT
IN THE WALLS OF THE CARTON.
The unit will arrive in a crate and will be bolted or banded to a skid. Immediately upon
receipt, inspect the crate carefully for exterior damage.
Carefully remove the crate from around the kettle. Thoroughly inspect the unit for
concealed damage. Report any shipping damage or incorrect shipments to the delivery
agent.
Write down the model number, serial number, and installation date, and retain this
information for future reference. Space for these entries is provided at the top of the
Service Log at the back of this manual. Keep this manual on file and available for
operators to use.
When installation is to begin, carefully cut any straps which hold the unit on the skid. Lift
the unit straight up off the skid. Examine packing materials to be sure loose parts are not
discarded with the materials.
Attach the tilt handle (normally shipped inside the kettle) by carefully threading it into the
socket on the trunnion support. Be careful to avoid cross-threading the fine threads on
the trunnion.
CAUTION
THIS UNIT WEIGHS 50 LBS (23 KG).
INSTALLER SHOULD OBTAIN HELP AS
NEEDED TO LIFT THIS WEIGHT SAFELY.
NOTE: After handle installation on the right
hand side, retain the hardware supplied with
the unit for left hand installation.
