-26-
Figure 18.
Step clamp is straight and secure.
Figure 20.
Three clamps holding workpiece.
Figure 21.
Clamp will interfere with path of cutter.
Figure 19.
Step clamp is crooked and will not hold.
Note Gap
G9959/G9977 Wood Mill
Whenever clamping a workpiece to the Wood
Mill’s table, remember these important safety
guidelines:
• Make sure the interlocking components
of the step clamps engage fully and that
the step clamp lays evenly on the work-
piece. See Figures 18 and 19.
• Always have a minimum of 3 clamping
devices when securing the workpiece to
the table as in Figure 20.
• Check clearance by moving the table
(with the machine unplugged) along the
intended path. Obstructions could lead
to a “crash” creating an unsafe condition
and result in serious personal injury. See
Figure 21.
