g0667X high precision Vs Vertical Mill
-19-
6. remove the cap screws on the rim of the
base, position the splash pan in place, and
secure it with the cap screws (see
Figure
15).
Figure 15. splash pan installed.
Cap screw
splash pan
7. Wrap the threads of the hose elbow connec-
tors with teflon tape, then thread them into
holes located on either side of the table (see
Figure 16).
Figure 16. Coolant return hose installed.
hose Clamp and
return screen
Elbow Connector
Coolant hose
8. loosen the hose clamp, push the hose onto
the elbow connector, then tighten the hose
clamp around the hose and elbow connec-
tor.
Note:
Tug the hose to make sure that it is
firmly attached to the connector.
9. insert the other end of the fluid return hose
into the hose clamp mounted on the coolant
return screen (see
Figure 16).
