Model T28366 (Mfd. Since 04/18)
-31-
Coolant Type ... H9240 Soluble Oil or Equivalent
Coolant Amount ........................................
1
⁄
2
Liter
Check/Add Frequency ................................. Daily
Change Frequency ..................................Monthly
Item(s) Needed
Qty
Goggles ............................................................. 1
Gloves ............................................................... 1
Respirator (Optional) ......................................... 1
Empty 2-litre Container ...................................... 1
New Coolant ............................................ 2 Liters
Siphon Hose (2 ft. or Longer) ............................ 1
Small Brush ....................................................... 1
Disposable Shop Rags ...................... As Needed
To add coolant:
1. DISCONNECT MACHINE FROM POWER!
2. Pre-mix coolant in an empty 2-liter container.
Note: Refer to manufacturer's specifications
for proper water/oil mix.
3. Wearing protective equipment, open coolant
reservoir lid (see
Figure 43).
Coolant
4. Pour coolant into reservoir until pump is
submerged (approximately
3
⁄
4
full).
5. Close coolant reservoir lid.
To drain and clean coolant reservoir:
1. DISCONNECT MACHINE FROM POWER!
2. Wearing protective equipment, open coolant
reservoir lid (see
Figure 43).
3. Remove and wipe coolant pump clean
(see
Figure 43).
4. Siphon and dispose of old coolant and swarf
according to federal, state, and fluid manu-
facturer's requirements.
5. Thoroughly clean tray screen, reservoir
screen, and inside of coolant reservoir
(see
Figure 44).
BIOLOGICAL AND POISON
HAZARD! Use proper per-
sonal protection equipment
when handling coolant and
follow federal, state, and
fluid manufacturer require-
ments to properly dispose
of coolant.
6. Use a rag to wipe out residual coolant and
swarf inside reservoir.
7. Place pump back into coolant reservoir.
8. Add coolant (refer To add coolant procedure
on
This Page for instructions).
Figure 44. Cleaning screens and reservoir.
Figure 43. Location of coolant system
components.
Coolant
Hose
Tray
Screen
Coolant
Reservoir
Reservoir
Screen
Reservoir
Lid
Coolant
Pump
Tray
Screen
Reservoir
Screen