Model T27961 (Mfd. Since 02/17)
-20
-
Replacing Belts
To replace belts:
1.
Remove base plate (see
Figure 18).
2.
Remove tap screws that secure
both halves of housing together,
then carefully pull housing apart
to keep components intact. Lay
halves down flat so interior is upright
(see
Figure 18).
3.
Remove center tensioner, both timing
belts, and V-belt (see
Figure 19).
4.
Replace all three belts at the same
time, then re-install tensioner,
housing, and base plate.
Tools Needed Qty
Phillips Head Screwdriver...........................1
Flat Head Screwdriver.................................1
Replacement belt part numbers:
V-Belt........................................PT27961020
Timing Belts.............................PT27961041
Figure 18. Housing opened to gain access
to belts.
Figure 19. Location of tensioner and belts.
Timing Belts
V-Belt
Tensioner
Summary of Contents for T27961
Page 28: ......
