Grizzly T27961, Owner'S Manual

Page: 14 / 28

Model T27961 (Mfd. Since 02/17) -14
-
Installing Sanding
Drum/Sleeve
To install sanding drum/sleeve:
1. Place 13mm fender washer and rubber
drum on spindle shaft (see
Figure 7).
2. Secure drum on spindle with (1)
M6-1 x 12 cap screw and (1) 6mm
fender washer, but do not tighten yet
(see
Figure 8).
3. Slide appropriate sanding sleeve over
rubber drum, making sure sanding
sleeve is flush with end of rubber drum
(see
Figure 8).
4. Tighten cap screw on end of spindle
shaft (see Figure 8).
The Model T27961 includes (3) sanding
drums and (4) sanding sleeves. Before
sanding, you must install the appropriate
sanding drum/sleeve for your operation.
Figure 7. Sander assembly.
Fender Washer
Rubber
Drum
Spindle
Shaft
Figure 8. Assembled spindle components.
Cap Screw
Sanding
Sleeve
Fender
Washer