Model T27417 (Mfd. Since 09/15)
-31-
17. Install spindle (#81) with upper pulley (#90)
and bearing sleeve.
18. Install Woodruff key (#83) into spindle (#81),
as shown in
Figure 42.
Note:
A piece of clear tape can be used
to ensure Woodruff key (#83) stays in
place during re-assembly.
19. Install new
3
⁄
8
" drive belt (#88) onto upper pul-
ley (#90).
20. Install upper pulley (#90) onto spindle (#81).
21. Slide
3
⁄
8
" drive belt (#88) onto drive pulley
(#61).
Note:
Verify lower pulley (#87) and upper
pulley (#90) are properly mated together, and
that Woodruff key (#83) remains in place.
22. Install spindle washer (#81) and retaining ring
(#84), as shown in
Figure 43.
23. Install compression spring (#80), ensuring
hooked end is locked into upper pulley (#90)
shoulder, as shown in
Figure 44.
15. Install new
1
⁄
4
" drive belt (#89) onto lower pul-
ley assembly (#87).
16. Install
1
⁄
4
" drive belt (#89) onto drive pulley
(#61) with drive belt wrapped around proper
side of the tension roller assembly (#52), as
shown in
Figure 41.
Drive
Pulley
Tension
Roller
Assembly
Figure 41.
1
⁄
4
" drive belt installed onto drive
pulley and tension roller assembly.
Figure 42. Installing Woodruff key into spindle.
Spindle
Washer
Retaining
Ring
Figure 43. Spindle washer and retaining ring
installed.
Compression
Spring
Hooked End
Figure 44. Hooked end of compression spring
locked into upper pulley shoulder.
Woodruff
Key
Spindle
1
⁄
4
" Drive Belt
Summary of Contents for T27417
Page 44: ......
